mVPN Fun in the Lab: Add the Multicast at the Customer – Part 4 of 6

Time to add multicast to our MPLS series!  Woot!

mvpn add multicast to the customer device

In this blog we will start simple.  We will focus on adding multicast to the customer portion of the network.  In the NEXT blog I will show you how I have the MPLS cloud configured to offer the mVPN to the customer.

So again… for this blog our focus will ONLY be on the customer portion of the network.  On Mozzarella and on String.

Adding Multicast to the Customer Edge Devices (CEs)

So what will I need to do in both Mozzarella and String?

  1. Enable Multicast-Routing globally
  2. Enable PIM on all relevant interfaces
  3. Configure both with the same Rendezvous Point

On Mozzarella  this will look like the following –

On String  this will look like the following –

Start the Multicast Traffic

feature

Okay… well that worked. Boring huh?  I know.  Not quite as exciting when nothing goes wrong. Admittedly I know multicast and can probably configure it in my sleep.  But let’s talk about the things I also made sure I checked prior to running the multicast traffic

Multicast Checklist

  1. Check that Mozzarella and String both have a PIM neighbor up with the MPLS Cloud
  2. Check that String has knowledge in its RIB for the RP
  3. Check that String has knowledge in its RIB for the subnet of the Mcast source
  4. Start the Receiver off of String
  5. Check that String can see what I call the “pull” from the Receiver (IGMP membership report)
  6. Check that as a result of the “pull”, String has created a *,G entry and has added the LAN interface to the OIL
  7. Check that String has an IIF with an RPF neighbor on the *,G tree
  8. Check that Mozzarella received the *,G PIM Join
  9. Start the Source
  10. Check that Mozzarella sees a S,G formed as a result
  11. Check that Rx is getting the traffic
  12. Check String has a S,G and *,G now.

If you’d like more on Troubleshooting Multicast …. remember that ALL CiscoLive Breakout sessions are recorded AND free.

BRKIPM-2264 – Multicast Troubleshooting (2016 Las Vegas) – 2 Hours

Ready for the next blog?  Time to add Multicast to the SP cloud (PEs and P)

mVPN Fun in the Lab: Add Multicast in the Cloud – Part 5 of 6



Categories: Fun in the Lab

Tags: , , , , , , , , ,

2 replies

Trackbacks

  1. Building a MPLS L3VPN Unicast and Multicast Cloud (6 Part Blog Series) :
  2. mVPN Fun in the Lab: Following the Labels - Part 3 of 6 :

Leave a Reply